Hyundai Accent: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
|
| 2. |
Lift the vehicle.
|
| 3. |
Disconnect the canister close valve connector (A).
|
| 4. |
Disconnect the ventilation hose (B) from the fuel
tank air filter and canister close valve.
|
| 5. |
Remove the fuel tank air filter assembly after removing
a bolt (A).
|
| 6. |
Remove the bracket (A) after pulling it.
|
| 7. |
Release the lever (A), and then separate the canister
close valve (B) from the fuel tank air filter (C) after rotating it
in the direction of the arrow in the figure.
|
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV termina ...
Installation
•
Install the component with the specified
torques.
•
...
See also:
Installation
1.
Installation is reverse of removal.
Filler-neck assembly
bracket installation nut :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 ...
ESC OFF Switch. Description
and Operation
Description
1.
The ESC OFF switch is for the user to turn off the ESC system.
2.
The ESC OFF lamp is on when ESC OFF switch is engaged.
...
To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the
accelerator pedal. Increased speed will not interfere with cruise control operation
or change the set speed.
To retu ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com