1. |
Release the residual pressure in fuel line (Refer
to “Release Residual Pressure in Fuel Line” in this group).
|
2. |
Remove the rear seat [LH] (Refer to “Seat” in BD
group).
|
3. |
Remove the fuel pump service cover (A).
|
4. |
Disconnect the fuel pump connector (A).
|
5. |
Disconnect the fuel feed tube quick connector (B).
|
6. |
Disconnect the fuel tank pressure sensor connector
(C).
|
7. |
Disconnect the vapor tube (D).
|
8. |
Lift the vehicle and support the fuel tank with a
jack.
|
9. |
Remove the center muffler assembly (Refer to “Intake
And Exhaust System” in EM group).
|
10. |
Disconnect the fuel filler hose (A) and the vapor
hose (B).
|
11. |
Remove the parking brake line installation bolt (A).
|
12. |
Remove the fuel tank from the vehicle after removing
the fuel tank band (A).
|
Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Speedometer does not operate
Cluster fuse (10A) is blown
Check for short and ...
Back-up Lamp Switch. Specifications
Specifications
1.
Working voltage: DC 10~15V
2.
Operating force: 3.0kg Max.
3.
Voltage drop: - 0.4V
...
Installation
1.
Installation is reverse of removal.
PCV Valve installation:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7
lb-ft)
...