Hyundai Accent: Removal
| 1. |
Release the residual pressure in fuel line (Refer
to “Release Residual Pressure in Fuel Line” in this group).
|
| 2. |
Remove the rear seat [LH] (Refer to “Seat” in BD
group).
|
| 3. |
Remove the fuel pump service cover (A).
|
| 4. |
Disconnect the fuel pump connector (A).
|
| 5. |
Disconnect the fuel feed tube quick connector (B).
|
| 6. |
Disconnect the fuel tank pressure sensor connector
(C).
|
| 7. |
Disconnect the vapor tube quick-connector (D).
|
| 8. |
Remove the plate cover (E) after removing the installation
bolts, and then remove the fuel pump from the fuel tank.
|
Installation
1.
Installation is reverse of removal.
Fuel pump plate
cover installation bolt :
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.44 ~
2 ...
See also:
Instrument Cluster. Description
and Operation
Description
Function
Tail lamp warning buzzer
-
This function dose not operate if the vehicle equipped BCM.
-
With the tail lamp sw ...
Description and Operation
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and
a valve body (valves and solenoid valves). The oil pump is powered by the engine.
ATF passes through the oil ...
Output Speed Sensor. Description and Operation
Description
The output speed sensor (A) is a vital unit that measures the rate of
rotation of the transaxle's turbine shaft and output shaft, and delivers the
readings to the TCM. The se ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com