1. |
Open the fuel filler door, and then remove the filler-neck
assembly mounting screws (A).
|
2. |
Disconnect the fuel filler hose (A) and tue vapor
hose (B).
|
3. |
Remove the filler-neck assembly from the vehicle
after removing the bracket mounting bolt (A).
|
Key operations
Used to start the engine, lock and unlock the doors.
WARNING - Ignition key
Leaving children unattended in a vehicle with the ignition key is dangerous
even if the key is not in the ignition swit ...
ETC (Electronic Throttle
Control) System. Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Disassembly
If the disassembly procedure is complex, requiring many parts
to be disassembled, all parts should be disassembled in a way that will not
affect their performance or external appearance.
...