Hyundai Accent: Removal
| 1. |
Remove the transaxle assembly. (Refer to "Manual
transaxle system" in MT group)
|
| 2. |
Remove the clutch cover bolts. Be careful not to
be bent ortwist bolts. Loosen bolts in diagonal directions.
|
Inspection
1.
Inspect diaphragm spring wear which is in contact
with a concentric slave cylinder bearing.
2.
Check the clutch cover and disc surface f ...
See also:
Headlight, position light, turn signal light, side marker light and front fog
light bulb replacement
(1) Headlight (High/Low)
(2) Front turn signal light / Position light
(3) Side marker
(4) Front fog light (if equipped)
Headlight / Side marker
1. Open the hood.
2. Remove the headlight bulb ...
Removal
Pressure Side Impact Sensor
•
Removal of the airbag must be performed according to the ...
Installation
1.
Installation is the reverse of removal.
•
...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com