Hyundai Accent Manuals

Hyundai Accent: Removal - Clutch Master Cylinder. Repair procedures - Clutch System - Clutch SystemHyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Clutch System / Clutch System / Clutch Master Cylinder. Repair procedures / Removal

•
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
1.
Disconnect the push rod from the master cylinder by removing the snap pin (A) and washer.

2.
Remove the clutch pedal mounting nuts (A-2ea).
Tightening torque:
12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)

3.
Remove the battery and ECM.
(Refer to "Manual transaxle system" in MT group)
4.
Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.

5.
Remove the clutch master cylinder by turning it clockwise (A).

Clutch Master Cylinder. Repair procedures
...

Installation
1. Installation is the reverse of removal. • ...

See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the manifold absolute pressure sensor con ...

Inspection
• Frequent inhalation of brake pad dust, regardless of material composition, could be hazardo ...

Antenna Coil. Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A) after removing 3 sc ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com