1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
3. |
Remove the floor console.
(Refer to the Body group - "Console")
|
4. |
Remove the rear heating joint duct (A).
|
5. |
Pull up the lock, of the SRSCM connector, the disconnect the connector
(A and B).
|
6. |
Remove the SRSCM mounting nuts (3EA) from the SRSCM, then remove
the SRSCM.
|
Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replacing the ...
Front Strut Assembly. Components
and Components Location
Components
•
Tighten with specifed torque at curb position of vehicle
...
Tilting the sunroof
To open the sunroof
Push the sunroof control lever upward until the sunroof moves to the desired
position.
To close the sunroof
Pull the sunroof lever downward until the sunroof moves to the de ...