1. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
2. |
Remove the door scuff trim.
(Refer to the Body group - "Interior trim")
|
3. |
Remove the center pillar trim.
(Refer to the Body group - "Interior trim")
|
4. |
Disconnect the side impact sensor connector (A).
|
5. |
Loosen the side impact sensor mounting bolt (B) and remove the
side impact sensor.
|
Description and Operation
Description
1. System Description
AL: Auto Learning
CAN: Controller Area Network
ECU: Electronic Control Unit ...
Battery. Components and Components
Location
Components
1. Battery insulation pad
2. Battery
3. Battery tray
4. Battery mounting bracket
5. ECM & bracket assembly
...
Removal
•
Do not spill brake fluid on the vehicle;
it may damage the paint if brake fluid does contac ...