1. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
3. |
Remove the driver airbag module mounting bolts (2EA).
|
4. |
Remove the wiring fixing clip (C), and then release the connector
locking pin to disconnect the driver airbag module connector (B).
|
5. |
Remove the steering wheel and steering wheel column shroud. (Refer
to the Steering System group - "Steering Column and Shaft")
|
6. |
Disconnect the clock spring connector, then remove the clock spring.
|
Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are ...
Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use
only lubricants of the proper quality. The correct lubricants also help promote
engine efficiency that results in impro ...
Schematic Diagrams
Schematic Diagram
Connector pin number
Pin No.
Discription
Remark
1
-
2
- ...