Hyundai Accent: Removal and Installation
Hyundai Accent RB (2010-2018) Service Manual / Engine Electrical System / Charging System / Alternator. Repair procedures / Removal and Installation
| 1. |
Disconnect the battery negative terminal first, then
the positive terminal.
|
| 2. |
Loosen the mounting bolts (A,B)
|
| 3. |
Turn the adjusting bolt(B) clockwise in loose tension.
|
| 4. |
Remove the drive belt (A).
|
| 5. |
Disconnect the air compressor connector(A) and the
alternator connector (B), and remove the cable (C) from alternator "B"
terminal.
|
| 6. |
Remove the alternator(A).
|
| 7. |
Installation is the reverse order of removal.
|
| 8. |
Adjust the alternator belt tension after installation.
|
Disassembly
1.
Remove the rear cover (A).
2.
Loosen the mounting bolts(A) and disconnect the brush
holder assembly(B).
...
See also:
3. Exhaust emission control system
The Exhaust Emission Control System is a highly effective system which controls
exhaust emissions while maintaining good vehicle performance.
Vehicle modifications
This vehicle should not be mo ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Lift the vehicle.
3.
D ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least three minutes befo ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com