Hyundai Accent Manuals

Hyundai Accent: Removal and Installation - Battery. Repair procedures - Charging System - Engine Electrical SystemHyundai Accent: Removal and Installation

Hyundai Accent RB (2010-2018) Service Manual / Engine Electrical System / Charging System / Battery. Repair procedures / Removal and Installation

1.
Disconnect the battery terminals (A). Disconnect the negative terminal first.
Tightening torque
(-) terminal :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
(+) terminal :
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)

2.
Remove the air duct and air cleaner assembly. (Refer to EM group)
3.
Remove the battery insulation pad (A).
4.
Remove the battery (B) after removing the mounting bracket.
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

5.
Disconnect the ECM connectors (A) and then remove the ECM (B) and the battery tray (C).
Tightening torque
ECM bracket bolts & nut :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Battery tray bolts :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

6.
Installation is the reverse order of removal.
When installing the battery, fix the mounting bracket on the tray correctly.

Battery. Repair procedures
...

Inspection
Battery Diagnostic Flow Vehicle parasitic current inspection 1. Turn the all electric devices OFF, and then turn the ignition switch OFF. ...

See also:

Rear Seat Belt. Repair procedures
Replacement Rear Seat Belt Replacement [Sedan] • When installing the belt, make s ...

Circuit Diagram (1)
...

Inspection
1. Disconnect the ignition switch connector (B) and key switch connector (A) from under the steering column. 2. Check for continui ...

Hyundai Accent Manuals


В© 2011-2024 Copyright www.hamanual.com