Hyundai Accent: Removal and Installation
Hyundai Accent RB (2010-2018) Service Manual / Engine Electrical System / Starting System / Starter. Repair procedures / Removal and Installation
| 1. |
Disconnect the battery negative terminal.
|
| 2. |
Remove the air duct and air cleaner assembly. (Refer
to EM group)
|
| 3. |
Disconnect the starter cable (B) from the B terminal
on the solenoid then disconnect the connector (A) from the S terminal.
|
| 4. |
Remove the 2 bolts holding the starter, then remove
the starter (A).
|
| 5. |
Installation is the reverse of removal.
|
| 6. |
Connect the battery negative terminal last.
|
Disassembly
1.
Disconnect the M-terminal (A) on the magnet switchassembly.
2.
After loosening the 2 screws (A), detach the magnetswitch
assembl ...
See also:
Installation
1.
Installation is the reverse of removal.
...
Installation
1.
Install the washer reservoir.
Before installing the pump motor, check the f ...
Front fog light
Fog lights are used to provide improved visibility when visibility is poor due
to fog, rain or snow etc. The fog lights will turn on when fog light switch (1)
is turned to ON after the headlight ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com