Inspection
1. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
2. |
Measure the distance the steering wheel can be turned without
moving the front wheels.
|
3. |
If the play exceeds standard value, inspect the steering column,
shaft, and linkages.
|
1. |
Position the vehicle on a level surface and place the steering
wheel in the straight ahead position.
|
2. |
Start the engine and turn the steering wheel from lock to lock
several times to warm up the power steering fluid.
|
3. |
Attach a spring scale to the steering wheel. With the engine speed
900 ~ 1100rpm, pull the scale and read it as soon as the tires begin
to turn.
|
4. |
If the measured value exceeds standard value, inspect the power
steering gear box and MDPS system.
|
Windshield defrosting and defogging
WARNING - Windshield heating
Do not use the or
position during cooling operation in
extremely humid weather. The difference between the temperature of the outside air
and that of the windshie ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
...
Removal
•
DON’T remove the camshaft position sensor
while the engine is running or right after engi ...