Hyundai Accent Manuals

Hyundai Accent: Replacement - Front Disc Brake. Repair procedures - Brake System - Brake SystemHyundai Accent: Replacement

Front Brake Pads
1.
Remove the brake hose mounting bracket bolt (A).

Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.8 lb-ft)

2.
Loosen the guide rod bolt (B) and pivot the caliper (C) up out of the way.

Tightening torque:
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)

3.
Replace pad shim (D), pad retainers (C) and brake pads (B) in the caliper carrier (A).


Removal
1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~79.6 lb-ft) ...

Inspection
Front Brake Disc Thickness Check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

See also:

Emergency braking assistance (EBA). Anti-slip regulation (ASR) / Dynamic stability control (DSC)
Emergency braking assistance (EBA) In an emergency, this system enables you to reach the optimum braking pressure more quickly and therefore reduce the stopping distance. It is triggered in relatio ...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the cluster fascia panel (A) after disconnecting the trip switch connector(B). ...

Putting the spare wheel back in place. After changing a wheel
Putting the spare wheel back in place Put the spare wheel back in place in its housing. Slacken the nut on the bolt by a few turns. Position the fastening device (nut and bolt) in the middle ...

Hyundai Accent Manuals


В© 2011-2022 Copyright www.hamanual.com