[Disc Type]
1. |
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
|
2. |
Remove the rear wheel and tire (A) from rear hub .
|
3. |
Remove the clip (A) and then remove the parking brake cable (B).
|
4. |
Remove the brake caliper mounting bolts, and then place the brake
caliper assembly (B) with wire.
|
5. |
Loosen the mounting screws and then brake disc (A).
|
6. |
Loosen the hub mounting bolt and then remove the hub (A) from
torsion beam axle.
|
7. |
Install in the reverse order of removal.
|
1. |
Remove the rear wheel & tire.
|
2. |
Loosen the screw (A) and then remove the disc (B).
|
3. |
Remove the spring (A, B, C).
|
4. |
Remove the shoe (A).
|
5. |
Disconnect the parking brake cable (A) from lining (B).
|
6. |
Remove the clip (A).
|
7. |
Remove the parking brake cable clip (A).
|
8. |
Loosen the wheel speed sensor cable (A) bolt &nut and parking
brake cable (B) mounting nut.
|
9. |
Remove the brake hose (A) and then loosen the cylinder bolt.
|
10. |
Loosen the hub mounting bolt and then remove the hub (A) from
the torsion beam.
|
11. |
Install in the reverse order of removal.
|
Radial-ply tires
Radial-ply tires provide improved tread life, road hazard resistance and smoother
high speed ride. The radial- ply tires used on this vehicle are of belted construction,
and are selected to comple ...
General Information
The Micro 570 Analyzer (Canada only)
The Micro 570 Analyzer provides the ability to test the charging
and starting systems, including the battery, starter and alternator.
...
Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are
equivalent to the original factory units in diameter, rim width and offset.
WARNING
A wheel that is not the correct si ...