Hyundai Accent Manuals

Hyundai Accent: Replacement - Front Strut Assembly. Repair procedures - Front Suspension System - Suspension SystemHyundai Accent: Replacement

Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Front Suspension System / Front Strut Assembly. Repair procedures / Replacement

1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Be careful not to damage to the hub bolts when removing the front wheel & tire.
2.
Remove the brake hose (A) and the wheel speed sensor bracket(B) and wheel speed sensor (C) from the front strut assembly by loosening the mounting bolts.
Tightening torque :
(B,C) 7.8 ~ 11.8N.m(0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)

3.
Disconnect the stabilizer link (B) with the front strut assembly (A) after loosening the nut.
Tightening torque :
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

4.
Loosen the strut mounting nut (A).
Tightening torque :
49.0 ~ 58.8N.m(5.0 ~ 6.0kgf.m, 36.2 ~ 43.4lb-ft)

5.
Disconnect the front strut assembly (A) with the front axle (B) by loosening the bolt & nut.
Tightening torque :
137.3 ~ 156.9N.m(14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

6.
Installation is the reverse of removal.
•
Tighten with specifed torque at curb position of vehicle
•
Fix the strut rod and tighten the nut

Front Strut Assembly. Repair procedures
...

Disassembly and Reassembly
1. Compress the coil spring with a strut spring compressor. Do not compress the spring more than necessary. 2. Loosen the lock nut. ...

See also:

Inspection
Speed Operation Check 1. Remove the connector (A) from the wiper motor. 1. - 2. IGN+ 3. Parking 4. High 5. GND ...

Installation
1. Installation is the reverse of removal. A. ...

Description
The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Acc ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com