1. |
Remove the front wheel & tire.
|
2. |
Disconnect the stabilizer link (B) with the front strut assembly
(A) after loosening the nut.
|
3. |
Loosen the nut and then remove the tie-rod end (A) with the front
axle.
|
4. |
Loosen the nut and then remove the lower arm (A).
|
5. |
Loosen the bolt (A) and then disconnect the universal joint assembly
from the pinion of the steering gear box.
|
6. |
Remove the rubber hanger (A).
|
7. |
Remove the cross member from the body by loosening the roll rod
(A) mounting bolts and nuts.
|
8. |
Loosen the bolts & nuts and then remove the front sub frame (A).
|
9. |
Remove steering gearbox (A) from the front sub frame by loosening
the mounting bolts.
|
10. |
Installation is the reverse of the removal.
|
Components and Components
Location
Components Location
1. Engine Control Module (ECM)
2. Manifold Absolute Pressure Sensor (MAPS)
3. Intake Air Temperature Sensor (IATS)
4. Engine Coolant Temperature Sensor ...
Removal
1.
Remove the battery and the battery tray.
(Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
...
Antenna Coil. Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A) after removing
3 sc ...