Hyundai Accent: Restraint (Advanced)

Installation

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...

General Information

...

See also:

Repair procedures
On-vehicle Inspection Spark Test 1. Disconnect the connectors (A) and then ignition coils (B). 2. Disconnect ...

Components Operations
PCM (Power Train Control Module) 1. The PCM (ECM) (A) carries out a check of the ignition key using a special encryption algorithm, which is programmed into the transp ...

Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. Wiper Switch Washer Switch ...