Hyundai Accent: Rheostat. Repair procedures
Hyundai Accent RB (2010-2018) Service Manual / Body Electrical System / Lighting System / Rheostat. Repair procedures
Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
|
| 3. |
Remove the crash pad side switch assembly (A).
|
| 4. |
Disconnect the rheostat connector from lower crash pad switch.
|
| 5. |
Remove the rheostat switch.
|
| 6. |
The installation is the reverse of removal.
|
Inspection
1.
Operate the switch and check for continuity between terminals.
...
See also:
Inspection
Remove the overhead console lamp assembly then check for continuity between
terminals. If the continuity is not as specified, replace the map lamp switch.
...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Hard steering
Improper front wheel alignment
Excessive turning resistance of lower ar ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com