Hyundai Accent Manuals

Hyundai Accent: Seat Belt Buckle Switch (BS). Description and 
Operation - SRSCM - Restraint (Advanced)Hyundai Accent: Seat Belt Buckle Switch (BS). Description and Operation

Hyundai Accent RB (2010-2018) Service Manual / Restraint (Advanced) / SRSCM / Seat Belt Buckle Switch (BS). Description and Operation

Description

The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.

Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws (B) then connect the pressure side impact sensor connector (A). ...

Seat Belt Buckle Switch (BS). Components and Components Location
Components ...

See also:

ESC connector input/output
Connector Terminal Specification Remark No Description 29 IGNITION1(+) High level of wake up ...

Fuel Filler Cap. Description and Operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap an ...

Components(2)
[5 Door] 1. Roof trim 2. Retainer 3. Sunvisor 4. Assist handle 5. Assist handle bracket ...

Hyundai Accent Manuals


В© 2011-2025 Copyright www.hamanual.com