Hyundai Accent Manuals

Hyundai Accent: Seat Heater. Repair procedures - Seat Electrical - Body Electrical SystemHyundai Accent: Seat Heater. Repair procedures

Inspection

Driver seat and Passenger seat
1.
Check for continuity and measure the resistance between terminals.
[Cushion]

PIN
No.
Description
PIN
No.
Description
3
Heater (+)
5
NTC -
4
NTC +
6
GND


Average Max. temperature
- Cushion : HIGH : 42 ± 2°C / LOW : 39 ± 2°C
- Back : HIGH : 52 ± 2°C / LOW : 46 ± 2°C

2.
Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.

Standard value (Fabric / Leather)
- Cushion : 1.54Ω ± 10%
- Back : 1.23Ω ± 10%
- Set : 2.77Ω ± 10%


Seat Heater. Components and Components Location
Components ...

Seat Heater Switch. Schematic Diagrams
Schematic Diagram ...

See also:

Tire pressure monitoring system (TPMS)
(1) Low tire pressure telltale / TPMS malfunction indicator Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by ...

Tightening Torque Table Of Standard Parts
  Bolt nominal diameter (mm) Pitch (mm) Torque Nm (kg.cm, lb.ft) Head Mark 4 Head Mark 7 ...

Special Service Tools
Special Tools Tool (Number and name) Illustration Use 09861-31100 Sealant cut-out tool Cutting windshield sealant ( ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com