Hyundai Accent: Side Impact Sensor (SIS). Description and Operation

Side Impact Sensor (SIS) system consists of two P-SIS which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH).

Side Pressure Sensor is also called P-SIS because it detects pressure due to collision at its mounting location.

Side Impact Sensor is also called A-SIS because it detects acceleration.

SRSCM decides deployment of the airbag and the time of deployment through the collision signal of the SIS when the collision occurred.

Installation

• Do not turn the ignition switch ON and do not contact the battery cable while replacing the ...

Side Impact Sensor (SIS). Components and Components Location

Components ...

See also:

Removal
1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group) 2. Remove the under cover (A). ...

Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

Interior F ( 5Door )
Seatbelt height adjust upper mounting hole (Ø15) Seatbelt height adjust lower mounting hole (Ø15) ...