Hyundai Accent: SS-B Solenoid Valve(ON/OFF). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-B Solenoid Valve(ON/OFF). Specifications
Specifications
ON/OFF Solenoid Valve(SS-A, SS-B)
▷ Control type : Normal low type
|
Control pressure kpa (kgf/cm², psi) |
490.33(5.0, 71.12) |
|
Internal resistance(Ω) |
10 ~ 11 |
SS-B Solenoid Valve(ON/OFF). Description and Operation
Description
SS-B solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed
at valve body.
...
SS-B Solenoid Valve(ON/OFF). Schematic Diagrams
Circuit Diagram
...
See also:
Malfunction
In the event of a malfunction,
this warning
lamp comes on and a message is
displayed, when the ignition is switched on.
In this case, the gearbox goes into back-up
mode and is locked in 3rd gear ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the manifold absolute pressure sensor
con ...
Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
Hyundai Accent Manuals
В© 2011-2022 Copyright www.hamanual.com