Hyundai Accent: Tightening Torques
Hyundai Accent RB (2010-2018) Service Manual / Emission Control System / General Information / Specifications / Tightening Torques
|
Item |
kgf.m |
N.m |
lb-ft |
|
Positive crankcase ventilation valve installation |
0.8 ~ 1.2 |
7.8 ~ 11.8 |
5.8 ~ 8.7 |
|
Canister installation bolt/nut |
2.0 ~ 3.0 |
19.6 ~ 29.4 |
14.5 ~ 21.7 |
|
Fuel tank air filter installation bolt |
0.4 ~ 0.6 |
3.9 ~ 5.9 |
2.9 ~ 4.3 |
Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]
...
Troubleshooting
Troubleshooting
Symptom
Suspect area
Engine will not start or struggle to start
Vapor hose damaged or disconnected
Engine strugg ...
See also:
Replacement
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so that the fro ...
Replacement
Standard values, such as torques and certain adjustments,
must be strictly observed in the reassembly of all parts.
If removed, the following parts should always be replaced
with new ones ...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature sensor connector.
3.
Measure resistance between ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com