Hyundai Accent: Tires/Wheels

Rear Torsion Beam Axle. Repair procedures

Replacement [Disc Type] 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Alignment. Repair procedures-Revised

...

See also:

Fuel Pressure Control Valve. Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve ...

Inspection
1. Immerse the thermostat in water and gradually heat the water. 2. Check the valve opening temperature. ...

Service Adjustment Procedure
Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, ...