Hyundai Accent: To set cruise control speed
1. Push the cruise ON-OFF button on the steering wheel to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate.
2. Accelerate to the desired speed, which must be more than 25 mph (40 km/h).
3. Push the SET- switch, and release it at the desired speed. The SET indicator light in the instrument cluster will illuminate. Release the accelerator at the same time. The desired speed will automatically be maintained.
On a steep grade, the vehicle may slow down or speed up slightly while going uphill or downhill.
Cruise control system
➀ CRUISE indicator
➁ SET indicator
The cruise control system allows you to program the vehicle to maintain a constant
speed without resting your foot on the accelerator pedal.
Thi ...
To increase cruise control set speed
Follow either of these procedures:
Push the RES+ switch and hold it. Your vehicle will accelerate. Release
the switch at the speed you want.
Push the RES+ switch and release it immediately. ...
See also:
Air bag warning light
The purpose of air bag warning light in your instrument panel is to alert you
of a potential problem with your air bag - Supplemental Restraint System (SRS).
When the ignition switch is turned ON ...
Troubleshooting
Troubleshooting
Symptom
Suspect Area
Remedy
Water leaks from sunroof
Dirt accumulated in drain tube
Clear dirt inside of drain
...
Replacement
Standard values, such as torques and certain adjustments,
must be strictly observed in the reassembly of all parts.
If removed, the following parts should always be replaced
with new ones ...
Hyundai Accent Manuals
