Hyundai Accent Manuals

Hyundai Accent: Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Accent: Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation

Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation

Description

Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter.


Installation
1. Installation is the reverse of removal. • ...

Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Specifications Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.5, 1.42 ~ 7.82) ...

See also:

Installation
• Do not turn the ignition switch ON and do not contact the battery cable while replacing the ...

Snowy or icy conditions
To drive your vehicle in deep snow, it may be necessary to use snow tires or to install tire chains on your tires. If snow tires are needed, it is necessary to select tires equivalent in size and ...

Specification
Engine T/M Joint type Max. permissible angle Outer Inner Outer Inner Gasoline 1.6 ...

Hyundai Accent Manuals


© 2011-2024 Copyright www.hamanual.com