Replacement
1. |
Disconnect the battery negative cable from the battery.
|
2. |
Remove faulty part and fit bracket assembly to new part.
|
3. |
Secure new part to vehicle and fit connector.
|
4. |
Re-connect battery and turn ignition on.
|
5. |
Check that DTC flash rate matches virgin state indication.
|
Precautions For Catalytic Converter
If a large amount of unburned gasoline flows into
the converter, it may overheat and create a fire hazard. To prevent
this ...
Installation
1.
Installation is the reverse of removal.
•
...
Replacement
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so that the fro ...