Hyundai Accent: Wheel. Repair procedures
Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Tires/Wheels / Wheel. Repair procedures
Hub Nut Tightening Sequence
Tighten the hub nuts as follows.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
|
When using an impact gun, final tightening torque should be checked
using a torque wrench.
|
Rear Wheel Alignment
When using a commercially available computerized wheel alignment
equipment to inspect the rear wheel alignment, always position ...
Tire. Repair procedures
•
Using tires and wheel other than the recommended sizes
could cause unusual handling charact ...
See also:
High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back
for low beams.
The high beam indicator will light when the headlight high beams are switched
on.
To prevent the ...
Floor mat anchor
When using a floor mat on the front floor carpet, make sure it attaches to the
floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward.
WARNING
The floor mat must be ...
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
Hyundai dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to prevent dam ...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com