Removal
1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the front seat (LH) assembly.
(Refer to the Body group - "Seat")
|
3. |
Disconnect the yaw rate & lateral G sensor connector (A).
|
4. |
Remove the mounting nuts (B).
|
5. |
Installation is the reverse of removal.
|
Reassembly
1.
Install the hub bearing to the knuckle assembly.
(1)
Lay the knuckle assembly (A) on press.
(2)
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the engine coolant temperature sensor
con ...
Disassembly
1.
Disconnect the M-terminal (A) on the magnet switchassembly.
2.
After loosening the 2 screws (A), detach the magnetswitch
assembl ...