Hyundai Accent Manuals

Hyundai Accent: Removal - Rear Disc Brake. Repair procedures - Brake System - Brake SystemHyundai Accent: Removal

1.
Remove the rear wheel & tire.

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.
Remove the parking brake cable (A), after removing the clip (B).

Parking brake lever in the car must be in fully loosened position.
3.
Remove the hose eyebolt (B).

Tightening torque:
Brake hose to caliper:
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)

4.
Loosen the caliper mounting bolts (C), then remove the rear caliper assembly (A).

Tightening torque:
Caliper assembly to carrier:
49.0 ~ 58.8 N.m (5.0 ~ 6.0 kgf.m, 36.2 ~ 43.4 lb-ft)

5.
Remove the rear brake disc by loosening the screws (A).


Rear Disc Brake. Repair procedures
...

Replacement
Rear Brake Pads 1. Loosen the guide rod bolt (B) and then remove the rear caliper body (A). Tightening torque: 21.6 ~ 31 ...

See also:

Components and Components Location
Component Location 1. Sunroof 2. Sunroof switch 3. Sunroof motor & controller ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. Rem ...

Electronic stability control (ESC)
The Electronic Stability control (ESC) system is designed to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC appl ...

Hyundai Accent Manuals

В© 2011-2026 Copyright www.hamanual.com