Replacement
|
1. |
Remove the front bumper cover.
(Refer to the BD group – “Front bumper”)
|
2. |
Loosen the mud guard mounting screws.
|
3. |
After loosening the mounting screws, then remove the front bumper
side mounting bracket (A).
|
4. |
Using a screwdriver or remover, remove the fender side cover (B).
|
5. |
After loosening the mounting bolts and nut, then remove the fender
(A).
|
6. |
Installation is the reverse of removal.
|
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) fro ...
Recommended SAE viscosity number
CAUTION
Always be sure to clean the area around any filler plug, drain plug, or
dipstick before checking or draining any lubricant. This is especially important
in dusty or sandy areas and when ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loosen 2 screws holding the overhead console (A).
3.
...