Hyundai Accent: Intake Air Temperature
Sensor (IATS). Schematic Diagrams
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature
Sensor (IATS). Schematic Diagrams
Circuit Diagram
| (M/T) |
| (A/T) |
Intake Air Temperature
Sensor (IATS). Specifications
Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
40.93 ~ 48.35
-20
...
Intake Air Temperature
Sensor (IATS). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between th ...
See also:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the trunk trim.
(Refer to the BD group - " Trunk Lid")
...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraul ...
Side Impact Sensor (SIS). Description and Operation
Description
The Side Impact Sensor (SIS) system consists of two front SIS which are
installed inside the Center Pillar (LH and RH). They are remote sensors that
detect acceleration due to co ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com