Hyundai Accent: Inspection| 1. |
Connect the GDS on the Data Link Connector (DLC).
|
| 2. |
Measure the output voltage of the FTPS.
|
RemovalAdjustment
Hood Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B)
by moving it up or down, or right or left.
2.
Adju ...
Removal Of Parts
First find the cause of the problem and then determine whether
removal or disassembly before starting the job.
...
Towing another vehicle
On the rear bumper, unclip the cover by
pressing at the bottom.
Screw the towing eye in fully, until it reaches
a stop.
Install the tow bar.
Switch on the hazard warning lamps on both
vehi ...