Hyundai Accent Manuals

Hyundai Accent: Installation - Clutch Master Cylinder. Repair procedures - Clutch System - Clutch SystemHyundai Accent: Installation

1.
Installation is the reverse of removal.
•
Perform bleeding air procedure in clutch release cylinder after pouring the brake fluid.
(Refer to "clutch release cylinder" in CH group)

Removal
• Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contac ...

Clutch Pedal. Components and Components Location
Components 1. Reverse hose 2. Master cylinder 3. Clutch switch 4. Ignition lock switch 5. Pedal pad ...

See also:

Replacement
1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the fro ...

Components and Components Location
Components 1. HECU module 2. Front wheel speed sensor 3. Rear wheel speed sensor 4. Yaw rate & Lateral G sensor 5. Steering angle sensor 6. ABS Warning l ...

Dimensions Projected
1. These are the dimensions measured when the measurement points are projected from the vehicle's surface, and are the reference dimensions used for used for body ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com