Hyundai Accent: Sliding the sunroof
To open or close the sunroof (manual slide feature), pull or push the sunroof control lever backward or forward to the first detent position.
To open the sunroof (autoslide feature), press the sunroof control switch towards the rear of the vehicle for more than 0.5 second.
The sunroof will slide to the recommended open position (about 2 in. before the maximum slide open position).
To stop the sunroof sliding at any point, pull or push the sunroof control switch momentarily.
To open the sunroof to the maximum slide open position, press the the switch towards the rear of the vehicle once again and hold it until the sunroof slide all the way open.
NOTICE
To reduce wind noise while driving, we recommend you to drive at the recommended postion (about 2 in. before the maximum slide open positon).
To close the sunroof (autoslide feature), move the sunroof control switch towards the front of the vehicle for more than 0.5 second.
The sunroof will close all the way. To stop the sunroof sliding at any point, pull or push the sunroof control switch momentarily.
Automatic reversal
If an object or part of the body is detected while the sunroof is closing automatically, it will reverse direction, and then stop.
The auto reverse function does not work if a small obstacle is between the sliding glass and the sunroof sash. You should always check that all passengers and objects are away from the sunroof before closing it.
Sunroof
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof
with the sunroof control switch located on the overhead console.
The sunroof can only be opened, closed, or tilted w ...
Tilting the sunroof
To open the sunroof
Push the sunroof control lever upward until the sunroof moves to the desired
position.
To close the sunroof
Pull the sunroof lever downward until the sunroof moves to the de ...
See also:
Injector. Description
and Operation
Description
Based on information from various sensors, the ECM can calculate
the fuel amount to be injected. The fuel injector is a solenoid-operated valve
and the fuel injection amount is c ...
Headlamp beam height adjustment
To avoid causing a nuisance to other road users,
the height of the headlamp beams should be
adjusted according to the load in the vehicle.
0. (Initial adjustment)
Driver only or driver + front pa ...
Components and Components
Location
Components Location
1. Engine Control Module (ECM)
2. Manifold Absolute Pressure Sensor (MAPS)
3. Intake Air Temperature Sensor (IATS)
4. Engine Coolant Temperature Sensor ...