Hyundai Accent Manuals

Hyundai Accent: Replacement - Front Strut Assembly. Repair 
procedures - Front Suspension System - Suspension SystemHyundai Accent: Replacement

1.
Remove the front wheel & tire.

Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Be careful not to damage to the hub bolts when removing the front wheel & tire.
2.
Remove the brake hose (A) and the wheel speed sensor bracket(B) and wheel speed sensor (C) from the front strut assembly by loosening the mounting bolts.

Tightening torque :
(B,C) 7.8 ~ 11.8N.m(0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)

3.
Disconnect the stabilizer link (B) with the front strut assembly (A) after loosening the nut.

Tightening torque :
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

4.
Loosen the strut mounting nut (A).

Tightening torque :
49.0 ~ 58.8N.m(5.0 ~ 6.0kgf.m, 36.2 ~ 43.4lb-ft)

5.
Disconnect the front strut assembly (A) with the front axle (B) by loosening the bolt & nut.

Tightening torque :
137.3 ~ 156.9N.m(14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

6.
Installation is the reverse of removal.
•
Tighten with specifed torque at curb position of vehicle
•
Fix the strut rod and tighten the nut

Front Strut Assembly. Repair procedures
...

Disassembly and Reassembly
1. Compress the coil spring with a strut spring compressor. Do not compress the spring more than necessary. 2. Loosen the lock nut. ...

See also:

Inspection
Driver Airbag (DAB) If any improper parts are found during the following inspection, replace the airbag module with a new one. ...

Body Control Module (BCM). Specifications
Specifications Item Requirement Remark Rated voltage DC 12V Shall activate normally in these range. Operat ...

This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: 1.This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cau ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com