Hyundai Accent: Front Impact Sensor (FIS). Description and
Operation
Hyundai Accent RB (2010-2018) Service Manual / Restraint (Depowered) / SRSCM / Front Impact Sensor (FIS). Description and
Operation
Description
The front impact sensor (FIS) is installed in the front side member. They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of the Front Impact Sensor (FIS) is to provide
an indication of a collision. The Front Impact Sensor (FIS) sends acceleration
data to the SRSCM.
Variant coding
After replacing the SRSCM with a new one, must be performed the “Variant
Coding” procedure.
1.
On ...
See also:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the trunk lower trim.
(Refer to the BD group - " Trunk Lid")
...
Fuel Tank Pressure Sensor
(FTPS). Specifications
Specification
Pressure [kPa (kgf/cm², in
H2O)
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
...
Engine Number
1.
Engine fuel
- G : Gasoline
2.
Engine range
- 4 : 4 cycle 4 cylinder
3.
Engine developmen ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com