Hyundai Accent: Fuel Tank Pressure Sensor
(FTPS). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Fuel Tank Pressure Sensor
(FTPS). Specifications
Specification
|
Pressure [kPa (kgf/cm², in
H2O) |
Output Voltage (V) |
|
-6.67 (-0.068, -26.8) |
0.5 |
|
0 |
2.5 |
|
+6.67 (0.068, 26.8) |
4.5 |
Fuel Tank Pressure Sensor
(FTPS). Description and Operation
Description
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative
emission control system and is installed on the fuel tank, the fuel pump, or
the canister. It checks the purge ...
Fuel Tank Pressure Sensor
(FTPS). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
See also:
Replacement
Standard values, such as torques and certain adjustments,
must be strictly observed in the reassembly of all parts.
If removed, the following parts should always be replaced
with new ones ...
Removing and storing the spare tire
Turn the tire hold-down wing bolt counterclockwise.
Store the tire in the reverse order of removal.
To prevent the spare tire and tools from “rattling” while the vehicle is in motion,
store ...
Fuel Filter. Repair procedures
Replacement
1.
Remove the fuel pump (Refer to “Fuel Pump” in this
group).
2.
Disconnect the electric pump wiring connector (A)
an ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com