Hyundai Accent: Anchor Pretensioner (APT). Description and Operation

Front anchor pretensioner operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver seat and it is an equipment to make up for the existing short stroke. Front anchor pretensioner is supported by two cables and it is an auxiliary equipment to prevent a driver and passenger from breaking away doubly as seat belt is being pulled toward anchor side after a collision.

Installation

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...

Anchor Pretensioner (APT). Components and Components Location

Components ...

See also:

Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

Purge Control Solenoid Valve (PCSV). Description and Operation
Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when ...

Side Body D ( 5Door )
Side outer panel notch Side outer panel notch Side outer panel notch ...