Hyundai Accent Manuals

Hyundai Accent: Front Impact Sensor (FIS). Description and Operation - SRSCM - Restraint (Advanced)Hyundai Accent: Front Impact Sensor (FIS). Description and Operation

Hyundai Accent RB (2010-2018) Service Manual / Restraint (Advanced) / SRSCM / Front Impact Sensor (FIS). Description and Operation

Description

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

Variant coding
After replacing the SRSCM with a new one, must be performed the “Variant Coding” procedure. 1. On ...

Front Impact Sensor (FIS). Components and Components Location
Components ...

See also:

Installation
1. Installation is reverse of removal. Accelerator pedal module installation nut: 12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 ...

If engine turns over normally but does not start
1. Check fuel level. 2. With the ignition switch in the LOCK position, check all connectors at ignition coils and spark plugs. Reconnect any that may be disconnected or loose. 3. If the engine sti ...

Temporarily exceeding the programmed speed. Switching off. Malfunction
Temporarily exceeding the programmed speed If needed (when overtaking, for example) it is possible to exceed the programmed speed by pressing the accelerator pedal. Cruise control is temporarily dea ...

Hyundai Accent Manuals

© 2011-2022 Copyright www.hamanual.com