Hyundai Accent Manuals

Hyundai Accent: Heated Oxygen Sensor (HO2S). Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Accent 2010-2019 Service ManualHyundai Accent: Heated Oxygen Sensor (HO2S). Specifications

Specification

HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.4 ~ 4.0 [20°C(68°F)]

HO2S [Bank 1/Sensor 2]
A/F Ratio (λ)
Output Voltage(V)
RICH
0.6 ~ 1.0
LEAN
0 ~ 0.4

Item
Specification
Heater Resistance (Ω)
Approx. 9.0 [21°C(69.8°F)]


Heated Oxygen Sensor (HO2S). Description and Operation
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies ...

Heated Oxygen Sensor (HO2S). Troubleshooting
Signal Waveform ...

See also:

Removal
1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. ...

Installation
Be sure to install the harness wires so they will not pinch or interfere with other parts. 1. ...

Distributing the sealant
11. Immediately drive approximately 4~6miles (7~10km or, about 10min) to evenly distribute the sealant in the tire. Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed ...

Categories

Hyundai Accent Manuals

© 2011-2019 Copyright www.hamanual.com