Hyundai Accent: Inspection
| 1. |
Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the
vapor hose/tube
A: Canister ↔ Atmosphere (Fuel tank air filter)
B: Canister ↔ Intake manifold
C: Canister ↔ Fuel tank
|
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Lift the vehicle.
3.
Rem ...
Installation
Installation is the reverse of removal.
Canister installation bolt/nut:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
See also:
Manifold Absolute Pressure
Sensor (MAPS). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Replacement
The injector combustion seal should be replaced new one to
prevent leakage after removing the injector.
1.
Remove the combustion seal (A) with a wire cutter.
...
Troubleshooting
Failure Diagnosis
1.
In principle, ESC and TCS controls are prohibited in case of ABS
failure.
2.
When ESC or TCS fails, only the failed s ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com