Hyundai Accent: Canister. Repair procedures

Repair procedures

Inspection [System Inspection] 1. Disconnect the vapor hose from the intake manifold and connect a vacuum pump to the nipple on the intake manifold. · At Col ...

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. Rem ...

See also:

Introduction
With the Tire Mobility Kit you stay mobile even after experiencing a tire puncture. The system of compressor and sealing compound effectively and comfortably seals most punctures in a passenger c ...

Components Operations
PCM (Power Train Control Module) 1. The PCM (ECM) (A) carries out a check of the ignition key using a special encryption algorithm, which is programmed into the transp ...

Inspection
TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side ...