1. |
Install the washer reservoir.
|
2. |
Install the washer motor.
|
3. |
Install the washer hose.
|
4. |
Connect the washer motor connector.
|
5. |
Install the front bumper.
|
6. |
Check the washer motor operation.
|
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature sensor connector.
3.
Measure resistance between ...
TPMS Receiver. Repair
procedures
Replacement
1.
Disconnect the battery negative cable from the battery.
2.
Remove faulty part and fit bracket assembly to new part.
...
Service Standard
Item
Specification
Ignition Timing (°)
BTDC 3 ± 10
Idle Speed (rpm)
A/C OFF
Neutral, N, P-range
...