Hyundai Accent: Instrument Cluster. Repair procedures

Instrument Cluster. Description and Operation

Description Function Tail lamp warning buzzer - This function dose not operate if the vehicle equipped BCM. - With the tail lamp sw ...

Inspection

Speedometer 1. Adjust the pressure of the tires to the specified level. 2. Drive the vehicle onto a speedometer tester. Use wheel chocks ...

See also:

To resume cruising speed at more than approximately 25 mph (40 km/h)
If any method other than the cruise ON/OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES+ switch is ...

Control System Composition
Fault Diagnosis Features a fail-safe mechanism that prevents dangerous situations from developing in the event of a transaxle failure. The limp home mode engages if the transaxle mal ...

Removal
1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. ...