Hyundai Accent: Passenger Airbag (PAB) Module. Repair procedures

Passenger Airbag (PAB) Module. Components and Components Location

Components ...

Removal

1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. ...

See also:

Repair procedures
Component Replacement After Deployment Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Tr ...

Projected Dimensions ( 4 Door )
Front side member tooling hole (Ø6.6) Side cover mounting hole (B/B’: Ø6.6/ Ø8.6) ...

Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) fro ...