Hyundai Accent: Passive Occupant Detection System (PODS-F). Description and Operation

In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Passive occupant detection system (PODS-F). If the seat is occupied, PODS-F detects passenger presences status and send signal to SRSCM via CAN.

SRSCM recognizes the signal as 2(two) different classifications; that is, 1(Empty or small occupant with child restraint system), 2(Occupied with large occupant and small occupant).

With these signal, ACU determines whether it needs to deploy PAB(Passenger Airbag) or not.

Installation

Be sure to install the harness wires so they will not pinch or interfere with other parts. 1. ...

Passive Occupant Detection System (PODS-F). Components and Components Location

Components ...

See also:

License plate light bulb replacement
4 Door 1. Remove the trunk trim. 2. Remove the socket by turning it counterclockwise. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Install the socket by turning it c ...

Repair procedures
Component Replacement After Deployment Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Tr ...

Rail Pressure Sensor (RPS). Troubleshooting
Signal Waveform ...