Hyundai Accent: Rail Pressure Sensor (RPS). Repair procedures

Rail Pressure Sensor (RPS). Schematic Diagrams

Circuit Diagram (M/T) (A/T) ...

Inspection

1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the manifold absolute pressure sensor con ...

Installation
• Install the component with the specified torques. • ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...