Hyundai Accent: Rear combination lamp. Repair procedures

Installation

1. Install the high mounted stop lamp. 2. Install the trunk trim. ...

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the trunk lower trim. (Refer to the BD group - " Trunk Lid") ...

See also:

Side Impact Sensor (SIS). Description and Operation
Description The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to co ...

To decrease the cruising speed
Follow either of these procedures: Push the SET- switch and hold it. Your vehicle will gradually slow down. Release the switch at the speed you want to maintain. Push the SET- switch and re ...

Driver Airbag (DAB) Module and Clock Spring. Description and Operation
Description Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash ...